The Corsair K70 RGB RAPIDFIRE Mechanical Gaming Keyboard

The new Corsair K70 RGB RAPIDFIRE is physically very similar to any previous variation of the K70 that we have reviewed in the previous years. As a matter of fact, the only actual difference that it has over the Corsair K70 RGB (now that the old Corsair Gaming logo has been changed) is the presence of a USB pass-through port at the rear of the keyboard.

It features an anodized brushed aluminum chassis, with the keys secured directly on its surface rather than being embedded into it. Aesthetics are a completely subjective matter, so we will let you decide what you think about the appearance of the K70 RGB RAPIDFIRE. From a purely practical point of view, the keyboard is extremely easy to clean, as a simple blow can remove most debris from the aluminum surface of the keyboard.

The K70 RGB RAPIDFIRE is a standard 104 keys keyboard, but it does not fully adhere to the ANSI layout, as the bottom row of the keyboard has a 6.5× Spacebar, two 1.25× ALT, two 1.5× CTRL and three 1× WIN/Menu bottom row keys. The standard ANSI layout has a 6.25× Spacebar and seven 1.25× bottom row keys. The keycaps are made from ABS plastic and have large, futuristic characters, while the Space Bar key is textured.

Besides the typical 104 keys of a full-sized keyboard, the K70 RGB RAPIDFIRE also has seven extra keys and a volume control knob. Four of them are media control keys (Play/Pause, Stop, Forward and Back), one is the volume mute button and the two smaller keys towards the center are the windows key lock and the backlighting brightness control. Three very small white LED lights serve as the three standard key lock indicators (Caps, Num and Scroll Lock). The LED lights of the three indicators are the only lights that are not customizable on the K70 RGB RAPIDFIRE.


Beneath the keycaps we find Cherry’s new MX RAPIDFIRE switches. The RGB versions found on this keyboard have a clear plastic body and silver axles. The MX RAPIDFIRE switch is very similar in design to the MX Red switch, with the most significant change being that its travel distance has been reduced by 0.8 mm. This offers faster actuation (1.2 mm to the actuation point instead of 2 mm) but also shortens the full travel distance of the key as well. However, things are not technically quite as simple as that. The actuation force remains the same (45 Cn) while the distance is shortened by nearly 50%. While the travel of the key remains linear, the force per mm of travel increases at a much higher rate. As a result, the MX RAPIDFIRE switch feels significantly stiffer and stronger to the user, especially after the actuation point, and also resets faster than the classic MX Red switch.

A USB pass-through port can be found at the rear of the K70 RGB RAPIDFIRE. Do note that both of the keyboard’s USB connectors need to be inserted for the pass-through port to function, even if the main connector is plugged into a USB 3.0 port. The second connector is not necessary for the keyboard itself to function properly if the main connector has been plugged into a USB 3.0 port, only the USB pass-through port will not function. If the main connector is plugged into a USB 2.0 port, the use of both connectors becomes a necessity, as the keyboard’s power requirements technically exceed the capacity of a USB 2.0 port. At the back of the keyboard there's a switch that can adjust the polling rate of the keyboard. This function will be useless with modern systems but may enhance the compatibility of the keyboard with older systems and certain devices, such as cheap KVM switches. The default polling rate is 1 ms and the user can reduce it to 2 ms, 4 ms, or 8 ms.

The removal of the keyboard’s covers revealed that the K70 RGB RAPIDFIRE is technically the same as the K70 RGB, with the exception of the new switches and the insertion of the USB pass-through port. The soldering job and overall quality of the assembly is textbook, without any flaws to be found.

A NXP LPC11U37F-501 microcontroller is the heart of the K70 RGB RAPIDFIRE. It has an ARM Cortex-M0 processor with a maximum frequency of 50 MHz, 128 kB Flash memory, 4 kB EEPROM and 12 kB SRAM. There are more impressive solutions for mechanical keyboards available nowadays but Corsair obviously (and rightfully) went for the tested and proven solution that has been working into several of their products during the past couple of years.


Introduction, Packaging & Bundle The Corsair Utility Engine (CUE) Software


View All Comments

  • Michael Bay - Sunday, July 3, 2016 - link

    It was more or less a defalult with proplayer crowd because one could bind more keys around, especially in UT scene.
    Then some moved even further with YGHJ.
  • theduckofdeath - Monday, July 4, 2016 - link

    WASD became "the norm" simply because it's the most convenient as you get easier access to the large keys on the edge of the keyboard. Makes it easier to use more keys without having to look where you're pressing, I mean, just because you like gaming it doesn't mean you like learning how to be a words-per.minute obsessed typist. Most people never moved to ESDF like you claimed, some did and some actually even stuck with the original arrow keys, even though the arrow keys are even more impractically located for a left handed use. But, most people use WASD today. Reply
  • Death666Angel - Sunday, July 3, 2016 - link

    "It was never a standard to begin with" Pretty sure most games I own have it as the default key bindings for moving. So, standard. Reply
  • Footman36 - Sunday, July 3, 2016 - link

    As an owner of this keyboard as well as a number of other Cherry switched keyboard and Logitech Romer G, I can say that I definitely prefer the feel of the Romer G key. It is quiet, smooth and fast. Unfortunately Logitech go and spoil it by placing the switch in a series of crappy keyboard chassis....
    I am currently using this keyboard as my number one, however I will swap back to the Logitech as I prefer TKL.
    Just my opinion.
  • Icehawk - Sunday, July 31, 2016 - link

    I have the non RGB version of this - I only sort of like it. The key spacing is just a little off from what I am used to (various MS and Logis) and I mistype way more than I used to. DO NOT get any liquids on this keyboard, even a small amount, as it will start to freak out, once dry it will work again though. It's pretty loud even with O-rings on it too. I really don't know why I haven't replaced this other than it was expensive and looks cool? Reply
  • cainsworth - Wednesday, January 18, 2017 - link

    The arm rest that comes with the keyboard is flimsy. Unlike the keyboard itself, which has a sturdy metal body, the arm rest is made of plastic. The plastic tabs that hold it in place are poorly designed and break off easily. (An image is available at

    To make matters worse, Corsair refuses to replace the part under its warranty. Instead, they want $10, plus tax and shipping, to replace the armrest.

Log in

Don't have an account? Sign up now