GlobalFoundries Adds 12LP Process for Mainstream and Automotive Chips; AMD Planning 12LP CPUs & GPUsby Anton Shilov on September 21, 2017 7:00 AM EST
- Posted in
GlobalFoundries on Wednesday announced its new 12LP (leading performance) fabrication process. The new manufacturing technology was designed to increase transistor density and improve frequency potential compared to GlobalFoundries’ current-gen 14LPP tech. The company expects the new process to be used by suppliers of various ICs (integrated circuits), including designers of CPUs and GPUs as well as developers of chips for automotive applications and telecommunication solutions. One of the first customers to adopt the 12LP fabrication process will be AMD.
GlobalFoundries’ 12LP manufacturing technology builds upon the company’s 14LPP process that has been used for high-volume manufacturing (HVM) since early 2016. Just like its direct predecessor, the 12LP relies on deep ultraviolet (DUV) lithography with argon fluoride (ArF) excimer lasers operating on a 193 nm wavelength. GlobalFoundries promises that its 12LP provides a 15% higher transistor density and enables a 10% higher frequency potential (at the same power and complexity) compared to “16/14nm FinFET solutions on the market today”. The company does not elaborate which process it used for comparison, but a naturally guess would be its own 14LPP which the company knows well.
|Advertised PPA Improvements of New Process Technologies
Data announced by companies during conference calls, press briefings and in press releases
|7nm Gen 1
The new 12LP relies on the groundwork set by the 14LPP, but uses 7.5T libraries, which is one of the ways that enables GlobalFoundries to shrink die sizes by increasing transistor density. Since the library contains different elements, IC developers have to “recompile” their designs to take advantage of the process. Meanwhile, since the 12LP and the 14LPP are very similar, for GlobalFoundries’ existing customers migration path to the 12LP is pretty straightforward. As for others, they are more likely to use the upcoming 7 nm anyway given the fact that it is not far away.
|Comparison of 14 nm Branded Process Technologies|
|Fin Pitch||?||?||?||?||42 nm|
|Gate Pitch||?||?||78 nm||90 nm||70 nm|
|Min Metal Pitch||?||?||64 nm||64 nm||52 nm|
|Gate Height||?||?||less than 480 nm||480 nm||399 nm|
To a large degree, the 12LP is GlobalFoundries’ response to various manufacturing technologies that build upon the 14/16 offerings and optimize performance and transistor density that have been introduced by various contract makers of semiconductors over the past few quarters. Some of those processes are branded as “12 nm” (e.g., TSMC’s CLN12FFC and CLN12FFC-ULP) and other continuing to carry the “14 nm” monikers (e.g., Samsung’s 14LPC and 14LPU). All three leading foundries — GlobalFoundries, Samsung and TSMC — have been using their 14/16nm-branded technologies for years and have accumulated a lot of knowledge and experience, which is why they could roll out optimized versions of the processes and concentrate on performance and/or transistor density. In addition to this, GlobalFoundries is positioning the 12LP for automotive as well as RF/analogue applications, so there are certain enhancements related to reliability and ability to work in extreme conditions. In particular, GlobalFoundries promises to build a test chip that can work at extreme temperatures from -40°C to +105°C for Automotive Grade 2 qualification in Q4 2017. Keeping in mind lifecycles in the automotive industry, expect the 12LP to stay with GlobalFoundries for many years to come.
A legitimate question about the 12LP in the context of automotive applications is who will be GF’s primary customer(s) for the process. There are a number of players developing various chips for automotive applications these days, but when it comes to designers of SoCs that need to pack a lot of transistors, run them at high frequency and be Automotive Grade 2, the list shrinks rather dramatically.
“The world is in the midst of an unprecedented transition to an era of connected intelligence,” said GF CEO Sanjay Jha. “This new 12LP technology provides the performance and density improvements necessary to help our customers continue innovating at the system level, as they deliver real-time connectivity and edge processing to everything from high-end graphics and automobiles to industrial applications.”
In the meantime, AMD will be one of the first to adopt the tech and judging by comments made by Mark Papermaster (AMD CTO) and Sunjay Jha, the chip developer will use the 12LP to make both CPUs and GPUs using the tech.
“We are pleased to extend our longstanding relationship with GlobalFoundries as a lead customer for their new 12LP technology,” said Mark Papermaster, CTO and senior vice president of technology and engineering, AMD. “Our deep collaboration with GF has helped AMD bring a set of leadership high-performance products to market in 2017 using 14nm FinFET technology. We are excited to work with GF on its new 12LP process technology as a part of our focus on accelerating our product and technology momentum.”
AMD's CPU and GPU roadmaps from earlier this year both listed a "14nm+" node, which at the time was a curious situation since GlobalFoundries didn't have a node between 14nm and 7nm. The obvious takeaway at the time being that GlobalFoundries was developing an interim node - an enhanced version of 14nm - which today's announcement finally confirms. In which case in accordance with Papermaster's official statement, it looks like we should be expecting both Vega and Zen products produced on 12LP in the next year.
To date AMD has said very little about these products. But it's telling that their roadmaps call for existing architectures on the new node rather than their next-generation Navi & Zen 2 architectures, which at least officially, remain scheduled for 7nm. The big question, at least on the GPU side right now, is whether AMD's forthcoming (and still very secretive) Vega 11 GPU is the 12LP product on the company's roadmap, or if AMD is planning on doing a more thorough refresh of Vega at 12LP later on.
Conceptually, all of this is very close to the old "half node" release cadence for GPUs, which would typically see major new GPU architectures released on a new process node, and then smaller and more power-efficient chips released a year later on the interim half node. Half nodes largely died out at 45nm, as fabs opted to put their resources and focus into bringing up whole nodes sooner rather than investing in short-lived half nodes. However as whole node improvements have gone from two year events to three and four year odyssies, it looks like half nodes are back, and with them the refresh chip release strategy.
GlobalFoundries expects to start risk production using the 12LP fabrication technology in Q1 2018. The company does not disclose any timeframes for HVM, but expect them to be different for various chip developers. For example, AMD is a very close partner of GlobalFoundries, so the company gets access to PDKs ahead of many other clients. That said, expect AMD to release its products made using the 12LP rather sooner than later. Mark Papermaster says that the aforementioned chips are to be released in 2018, but he does not elaborate whether to expect them in the first or the second half of the year.
- Samsung and TSMC Roadmaps: 8 and 6 nm Added, Looking at 22ULP and 12FFC
- GlobalFoundries Details 7 nm Plans: Three Generations, 700 mm², HVM in 2018
- GlobalFoundries to Expand Capacities, Build a Fab in China
- GlobalFoundries Updates Roadmap: 7 nm in 2H 2018, EUV Sooner Than Later?
- AMD Amends GlobalFoundries Wafer Supply Agreement Through 2020, Gaining New Flexibility & New Costs
- EUV Lithography Makes Good Progress, Still Not Ready for Prime Time
Post Your CommentPlease log in or sign up to comment.
View All Comments
MajGenRelativity - Thursday, September 21, 2017 - linkI'm not Lisa Su, so I know as much of AMD's internal roadmaps as you do :) They could skip 7nm DUV, but I feel like that could be a bad idea. We'll have to see how it plays out!
Drumsticks - Thursday, September 21, 2017 - linkI think AMD is actually advantaged here. If you look at somebody like Intel, they need to design multiple chips to recoup the costs of their fab. It's a business model that has worked for them and likely still is, but not one AMD needs to follow. It's true that they've only designed one chip, but that chip has covered pretty much every market segment they can. Everything from high end laptops to high end servers is answered with the Zeppelin die. The only other spaces left to cover are desktop mainstream with integrated graphics, which is handled by Raven Ridge, and ULV mobile, which is covered by Ryzen mobile. It's not clear to me if those are the same die, but maybe they are. Even if not, that brings their total 14nm chips to three. If they can cover their entire market with those three dies, they probably don't have to bother with another.
jjj - Thursday, September 21, 2017 - linkIf risk is in Q1 how exactly are you confused about products in H1 or H2?
Anyway, this means that a Ryzen refresh is very very late , instead of a Q1 next year.
7nm is 2019 as always so ofc they need a Vega refresh next year but unlikely that a Polaris replacement can wait for 12nm as they need that in H1.
Ofc this is AMD and seems that they are suicidal and insisting on moving 2x slower than they should and not doing anything right.
Wish they would just drop half their roadmap and do the other half right instead of missing any and all opportunities and failing at everything.
MajGenRelativity - Thursday, September 21, 2017 - linkRyzen refresh could be Q2, and Ryzen is still very competitive right now. As for the GPU market, I'm not sure what AMD will do, but unfounded speculation is unwise.
wizfactor - Thursday, September 21, 2017 - linkI've always wondered if the reason why Zen, Polaris and Vega hit such a hard overclocking/voltage limit (e.g. 4 Ghz on Ryzen) has less to do with their microarchitecture and more to do with their lithography (GloFo 14nm). To be honest, when people complain about how power-hungry or hot Vega cards can be, I wonder if it would be a different story had Radeon chose to fab Vega with TSMC instead.
Still, a better process is a better process, so I hope AMD chips obtain a vastly improved power/thermal profile once they migrate to 12nm.
MajGenRelativity - Thursday, September 21, 2017 - linkThat's an interesting idea. While I would not be sad to see it, I wouldn't place bets on a VASTLY improved power/thermal profile. I'd expect SOME savings, but maybe not vast. It's a half-node after all
Threska - Thursday, September 21, 2017 - linkWell people are asking more of their GPUs so it's not totally unexpected. At best mature water-cooling will become prevalent.
0VERL0RD - Thursday, September 21, 2017 - linkAMD uses TSMC's 16nm for XBOX & PS4 so maybe it wasn't much of a difference in performance. Cost & yields probably played a part in those decisions.
haukionkannel - Thursday, September 21, 2017 - linkVega 56 is guite power effient because it runs lower clockspeeds. Vega 64 runs too high clockspeeds and is very uneffient, so Yes, the production proses is real hinderance. The architecture of Vega itself is sound, the production proses not so... Clobal founders proses now is much better suited to low power mobile prosessors than high speed CPU or GPU.
psychobriggsy - Thursday, September 21, 2017 - linkI'm guessing Ryzen and Vega refreshes in early H2 2018.
The former will hopefully incorporate some or all of Zen 2 updates (and have higher IPC as well as higher clocks), and the latter will hopefully sort out whatever is holding Vega back now.