Maxtor's MaXLine III 250GB: Bringing 16MB Buffers and NCQ to Hard Drivesby Anand Lal Shimpi on June 25, 2004 12:03 AM EST
- Posted in
Taking Advantage of NCQRemember that to take advantage of NCQ on the MaXLine III, a controller and drivers with NCQ support must be used. Currently, only Intel's ICH6 features support for NCQ when used with the Intel Application Accelerator 4.0 drivers.
The IAA 4.0 drivers will only work if ICH6's SATA controller is configured for use as an Advanced Host Controller Interface (AHCI) device. So, the first step to enabling NCQ is to enable AHCI within the BIOS. If the ICH6R RAID functionality is enabled, then the device is already set to be an AHCI device.
Be warned; in order to use the ICH6 controller as an AHCI device, you must have the IAA 4.0 drivers installed. Unfortunately, IAA 4.0 will not install if the controller is not configured as an AHCI first. What does this mean? If you don't have AHCI enabled initially and install Windows to a SATA drive, you will have to reinstall Windows to enable AHCI and provide a disk with the IAA 4.0 drivers during the Windows setup process when the F6 prompt appears. If you have AHCI already enabled and Windows installed, or if Windows is installed on a PATA drive, or if you have yet to install Windows, then there's nothing more to worry about.
Once in Windows, you'll want to install the IAA 4.0 application itself. Doing so will let you make sure that NCQ is enabled if the drive supports it. Also, the IAA 4.0 application will let you create RAID 0 and RAID 1 arrays if you have multiple drives.
Post Your CommentPlease log in or sign up to comment.
View All Comments
dmxlite - Saturday, June 26, 2004 - linkThe raptor has TCQ, which is basically the same, but in the raptor's case, it is actually an ATA implementation. TCQ has been around for awhile, originally from SCSI. The problem with the Raptor is it is not a 'real' SATA drive. It is a ATA drive with a SATA bridge, which at the time only offers the benefits of the smaller SATA cabling and such.
To get a better impression of Raptor vs. MaXLine III, you'll have to use a controller that supports both, like the Promise FastTrak TX4200. Here is a good article on TCQ and it advantages (using the Raptor):
skiboysteve - Saturday, June 26, 2004 - linkanand, the raptor has NCQ....
PrinceGaz - Saturday, June 26, 2004 - linkDoes using NCQ increase disk-related CPU load?
TrogdorJW - Saturday, June 26, 2004 - linkI'm more in agreement with Operandi on this review: Sure, there are instances where NCQ hurts performance (although we need to remember that this is just one implementaion of NCQ on the SATA chips: Intel's), but overall, I would easily take one of these drives over a Raptor. Performance is pretty close, but three or four times the capacity for most likely the same price? Come on, who wouldn't take the increased storage?
I'm just a little more than surprised that the largest 10000+ RPC drives are still stuck at such low densities. You can only find a couple 147 GB 10000 RPM SCSI drives, and no 15000 RPM drives that I'm aware of hold more than 74 GB. Give me a 10000 RPM drive with 100 GB platters, and then we're talking! (Wishful thinking for a few more years, I'd imagine.)
Anyway, the benefit of NCQ is going to depend largely on the bottleneck. Some things are CPU limited, in which case it won't help, at least not yet. Compression is a great example of this. If you had a multi-core or SMP setup and the compression was single-threaded, then NCQ could help out more. Other tasks are going to be limited by the sustained transfer, i.e. file copying. However, if you multitask file copying by, for example, copying two large files between drives at the same time, then sustained transfer rate is only part of the bottleneck, with access time being the other part. NCQ is designed to help improve access times, but even in the best case scenarios, it's not going to be tons faster.
IIRC, technologies like NCQ (which have been in SCSI for ages, via the split-transaction bus) usually don't hurt performance much and can periodically improve performance a lot. I don't know if this has changed much, but I remember seeing my boss start four or five applications at the same time on a SCSI workstation, and they loaded TONS faster than those same applications loaded on my non-SCSI system.
I've become so used to the bottlenecks in IDE systems that I usually avoid trying to launch multiple applications at the same time. I'd be interested to see some benchmarks in that area, i.e. launching Photoshop, Word, Excel, and Internet Explorer at the same time with and without NCQ. Yeah, it's a short-term bottleneck, but at times such delays are irritating.
pxc - Friday, June 25, 2004 - link
FacelessNobody - Friday, June 25, 2004 - linkSo based on what I've read, NCQ (and HyperThreading, for that matter) are techologies aimed at improving computer performance in specific situations. I suppose in discussion they sound short-sighted--helping only a few people some of the time. However, it wasn't long ago that 3D accelerators were the same way. The idea could still tank, computers may not go the way forseen in Intel's crystal ball, so it's a leap of faith developing techology like this, and that's why Intel tries so hard to push things like PCI Express and BTX.
I'm a bottom line person. Like Pariah (whose criticism has been excellent), I'd like a definitive statement telling me what improves by how much and how it affects me. The more I look into it though, it doesn't seem a thing like NCQ can give me that. My computer use (gaming, word processing, music) is affected more by raw power than anything else.
Anand Lal Shimpi - Friday, June 25, 2004 - linkPariah
Throughout the article we stated whenever the performance impact due to NCQ was positive, negative as well as whether or not it was negligible.
A 10% performance improvement is often our rule of thumb for perceivable performance impact. A number of companies have done studies that basically state a 10% impact is noticeable to the end user and we tend to agree.
Your example of a 30 -> 33 fps performance increase is a valid one, but if we're talking about measuring average frame rates I'd argue that a 10% increase in average frame rate could be very noticeable depending on the rest of the frame rates over the test period. Remember that with our Winstone tests we are measuring the time it takes to complete a task, and a 10% improvement in time savings is nothing to cast aside.
Performance improvement down the road due to NCQ is far from a guess in my opinion. The fact that Intel has integrated support for it into their new ICH6 and given how hard they have been pushing for the type of multithreaded/multitasking usage environments for the future should lend decent credibility to Intel seeing NCQ as a worthwhile feature. Again, look at the direction that even AMD is going when it comes to CPU design - the focus continues to be on multithreading/multitasking usage environments which, as long as you are doing so across more than one application, result in much more "server-like" disk access patterns than what we have currently.
As the PC architecture moves into the next phase of parallelism (moving beyond instruction level parallelism to thread/application level parallelism) it's inevitable that hard drive usage patterns do get a bit more random. Definitely not as much as servers, but definitely more than they are now.
Again I'll state that an improvement of 10% in a very realistic test is something that I'm sure any user would gladly have for free with their hard drive. It's very much like Hyper Threading; the performance differences are sometimes slightly negative or nothing at all, but in some very real world (albeit hard to benchmark) scenarios the performance improvement is undeniably evident.
nourdmrolNMT1 - Friday, June 25, 2004 - linkPariah-
there is a key word in the conclusion, it is called, potential, read it, the 6 line, 8th word. A lot of the conclusion is based around the future, and what NCQ can do in the future, it says that in todays world you get slight increase, but as computers become more multithreaded NCQ will increase performance.
p.s. dont go getting you panties in a wad over an article on an HD.
Pariah - Friday, June 25, 2004 - link"In terms of our excitement about NCQ, the conclusion never stated that NCQ increased performance tremendously across the board."
It also never stated that in 15 out of the 16 real world tests you ran, the improvement was anywhere from a 1% improvement to 4.9% reduction in performance, with the majority of tests showing a decrease in performance. That wouldn't seem to be a minor point to just gloss over and ignore in the conclusion, don't you think?
"But also remember that we only had three heavy-multitasking benchmarks, and the performance boost we saw in one of them (a very common scenario, who doesn't copy a file and browse the net or check email?) was nothing short of outstanding."
10.2% is considered outstanding? Most people would consider a 10% improvement to be about the bare minimum necessary to invoke a perceptible difference in speed for hard drives. I wouldn't call the performance of a card getting 33fps in Far Cry vs a card getting 30fps (the same 10% difference) to be "outstanding."
That's not to say that NCQ cannot actually provide outstanding performance. It most certainly can. Storage Review's server benchmarks show comparable 10k SCSI drives beating the Raptor by 30%+ and 15k drives just crushing it while only running neck and neck in workstation marks. But the fact remains, that those server benchmarks in no way mirror what us "ordinary folk" can duplicate on our home systems.
So, again, while we may be able to develop scenarios where NCQ will make a big difference, none of the tests run in this review came anywhere close to displaying those capabilities unless you consider a minimal perceptible difference in one test to be "outstanding." I would take a slightly more subdued approach in the conclusion that tells what the tests actually show and how they would benefit people today, rather than hyping something you weren't able to show and are only guessing might improve in the future.
Anand Lal Shimpi - Friday, June 25, 2004 - linkbroberts
Only the game tests used two drives, all of the other tests had the OS and the applications on the same drive.
I don't believe that a large buffer negates the advantages of NCQ, as they largely address two different problems. Large buffers help mostly with sequential transfers while NCQ is geared towards improving random access performance; if anything they are complementary.
You bring up a very good point, the benefit of NCQ could (in theory) be better seen with more fragmentation on a drive. Unfortunately it is difficult to construct a repeatable test involving fragmentation that's real world, I can easily do it in synthetic benchmarks though. That being said, we shouldn't need NCQ to improve fragmented performance - that's what defrag programs are for :)