Sabrent Rocket Q4 and Corsair MP600 CORE NVMe SSDs Reviewed: PCIe 4.0 with QLCby Billy Tallis on April 9, 2021 12:45 PM EST
Three years ago, a new variant of flash memory hit the SSD market which stores four bits of data in each memory cell called QLC. This new QLC NAND flash memory offered 33% better bit density compared to three bits per cell with mainstream TLC NAND. QLC initially arrived as a low-end alternative that provides better density and price, but the trade-off has been worse performance (and endurance). So far the use of QLC NAND has always meant that any drive with QLC belongs in an entry-level market segment, competing against the cheaper TLC NAND SSDs that cut corners on other components. But as more SSD vendors adopt QLC NAND in a wider range of products, some are starting to challenge the assumption that QLC is only for low-quality bargain products.
Prime Time QLC SSDs
Sabrent and Corsair are two very familiar brands that market SSDs based on reference designs from SSD controller vendor Phison. Both brands have followed Phison's lead in using QLC NAND for M.2 NVMe SSDs. The latest and greatest QLC solution from Phison uses its E16 SSD controller, which was the first consumer SSD controller to support PCIe Gen4. The Sabrent Rocket Q4 and Corsair MP600 CORE we are reviewing today are part of the first generation of PCIe 4 SSDs to use QLC NAND: an almost paradoxical combination of a high-end PCIe 4.0 connectivity with low-end QLC NAND. The question to answer is whether if QLC NAND is moving up market into mainstream or high-end products, or is it just PCIe 4.0 support now trickling down to low-end higher-capacity drives? This is what we set to find out with this review.
Corsair MP600 CORE
Many aspects of the Corsair MP600 CORE's spec sheet look pretty high-end. The drive comes with basically the same heatsink as Corsair's high-end TLC drives, albeit in a slightly different color.
Peak performance ratings are close to 5GB/s for reads and 4GB/s of writes, making PCIe 4.0 a necessity to hit those numbers.
|Corsair MP600 CORE Specifications|
|Capacity||1 TB||2 TB||4 TB|
|Form Factor||M.2 2280 PCIe 4 x4 with heatsink|
|NAND Flash||Micron 1Tbit 96L 3D QLC|
|Sequential Read (MB/s)||4700||4950|
|Sequential Write (MB/s)||1950||3700||3950|
|Random Read IOPS (4kB)||200k||380k||630k|
|Random Write IOPS (4kB)||480k||580k|
|Write Endurance||225 TB
The five-year warranty and pricing around $0.15/GB are also indicative that the MP600 CORE isn't exactly entry-level. But on the other hand, the write endurance rating of just over 0.1 drive writes per day is much lower than the usual 0.3 DWPD expected from mainstream consumer SSDs. There are also some unimpressive performance metrics, especially for the smallest 1TB capacity.
Sabrent Rocket Q4
Sabrent's published specs for their Rocket Q4 are quite a bit less detailed, but follow the same general pattern:
|Sabrent Rocket Q4 Specifications|
|Capacity||1 TB||2 TB||4 TB|
|Form Factor||M.2 2280 PCIe 4 x4
|NAND Flash||Micron 1Tbit 96L 3D QLC|
|Sequential Read (MB/s)||4700||4800||4900|
|Sequential Write (MB/s)||1800||3600||3500|
|Warranty||1 year (5 with registration)|
The Phison E16 controller was originally a very successful bid to be first on the market with a controller supporting PCIe 4.0: Phison ended up having a monopoly on PCIe 4.0 SSDs for over a year, and even some SSD brands that don't routinely use Phison controllers brought out new flagship models based on this controller. But now the successor E18 controller is shipping, as well as competing top of the line PCIe 4.0 drives from both Samsung and Western Digital with their own custom controllers. That leaves the E16 as an outdated part, with performance that is no longer sufficient for a flagship model, and power consumption that is quite high. The E16 is manufactured on 28nm whereas all the other PCIe 4.0 SSD controllers are build on more advanced nodes like 12nm. This means that the E16 is ripe for that cheaper PCIe 4.0 market, which makes sense when adding in some high density QLC.
All that being said, the E16 controller is still a step up from Phison's very successful E12 PCIe 3.0 SSD controller. These PCIe 4.0 controllers are backwards compatible with PCIe 3.0, so even in a system that only supports PCIe 3.0, a drive based on the Phison E16 (like the ones we are testing today) is a bit faster than the E12.
It doesn't currently make sense to pair QLC NAND with the expensive flagship E18 controller, but the E16 has found a second life as Phison's more affordable and mature Gen4 controller when paired with QLC. One consequence of replacing E12+QLC drives with E16+QLC designs is that the E16 controller is physically larger than the compact E12S version's package, and that size difference means the 8TB models cannot yet move up to the E16 controller due to lack of space on a M.2 2280 PCB. That's a shame, because the best showings for QLC NVMe SSDs have been at the largest capacities where huge SLC caches and the highest possible degree of parallelism allow drives to mostly overcome the worst downsides of QLC NAND.
In this review, we're comparing the 4TB Sabrent Rocket Q4 and 2TB Corsair MP600 CORE against a variety of other SSDs, from low-end QLC SATA SSDs to high-end gen4 drives with TLC NAND. Particularly interesting points of comparison include:
|Intel SSD 670p||PCIe 3.0 x4||SM2265||QLC|
|Sabrent Rocket Q||PCIe 3.0 x4||Phison E12S||QLC|
|Corsair MP400||PCIe 3.0 x4||Phison E12S||QLC|
|Samsung SSD 980||PCIe 3.0 x4||Samsung Pablo||TLC||DRAM-less|
|WD Blue SN550||PCIe 3.0 x4||WD Custom||TLC||DRAM-less|
|Seagate FireCuda 520||PCIe 4.0 x4||Phison E16||TLC|
Post Your CommentPlease log in or sign up to comment.
View All Comments
pdegan2814 - Wednesday, April 14, 2021 - linkThe endurance rating of the standard MP600 is exactly why I bought it as well. It blows most other SSDs out of the water in that regard. And it's more than fast enough for my needs.
ozzuneoj86 - Friday, April 9, 2021 - linkAll I get from any SSD review lately is that SK Hynix needs to release a Gen4 drive, since their Gen3 drive leads by a good margin in many tests already. Unless you need more than 1TB on a single drive, there's not much reason to go with anything but the P31 (or the 980 Pro if money is no object). Very high efficiency (less power is less heat), high performance, high consistency (empty vs full) and competitively low price. The only thing preventing me from getting a P31 myself is that I'm sure they'll put out a Gen4 version before long, and unless they screw something up it should be among the best drives available.
ozzuneoj86 - Friday, April 9, 2021 - linkSorry, I forgot about the SN850 and 970 Pro... those are also competitive, but much more expensive.
bernstein - Saturday, April 10, 2021 - linkThe problem with the p31 is that it was never available. at least in europe. And there is no 2tb model...
ozzuneoj86 - Sunday, April 11, 2021 - linkSorry to hear they are hard to get in Europe. The P31 is very easy to get in the US for $135 and often goes on sale for less at Amazon.
But I agree, not having a 2TB option is unfortunate.
Samus - Sunday, April 11, 2021 - linkWe can get the 1TB regularly for (MSRP?) $130-$135 at retail and online in the USA, but as you and ozzuneoj said, not having a 2TB variety is a missed opportunity for Hynix because this has been my go-to drive for nearly a year in just about every upgrade I do (I use nothing else in laptops or SFF\ITX systems where the power efficiency and low heat are most beneficial)
On top of that, I have installed dozens and zero have failed. An amazing accomplishment from Hynix. I've used the S31 in legacy systems with SATA ports and it's equally excellent especially for the price, though the MX500 is still my go-to drive for legacy systems because it is often slightly cheaper, and again, I have seen zero failures from those drives over the years.
Come on Hynix make a 2TB model already...
back2future - Sunday, April 11, 2021 - linkthat's not the point for data retention . Having data on a SSD (nand flash, type slc, mlc, tlc, qlc) it would be necessary specification for customers (beside TBW) how to store SSDs or power cycle for long term data security?
While having been impressed with performance (compared to non-raid HDD) since first time SSD experience, few information about long term data security is minor customer support on that item?
Hulk - Friday, April 9, 2021 - linkI'm pleasantly surprised by the very good performance metrics for these drives. The combination of 1/4 drive SLC cache with the "housekeeping" in the background makes for a fast, yet economical drive. I have a feeling prices on these will drop pretty quickly and they'll be a great buy in 6 months to a year. I don't think I'd use them in a laptop and I think I'd go 2TB or larger for the sake of performance and endurance though.
shabby - Friday, April 9, 2021 - linkQuality(endurance) , price, performance... choose two. With qlc you can only choose one 🙄
Hulk - Friday, April 9, 2021 - linkI'm not so sure about that. 225GB day written for 5 years for the 2TB drive. If you aren't in a server situation I don't know how you'd ever get near that number.