Back when I had Origin’s tri-Titan equipped Genesis in house, I received a few requests for benchmarks with PCIe 3 enabled. Because we tested the system with its default out of the box settings, the system was configured by default to only use PCIe 2 since NVIDIA does not officially support PCIe 3 on SNB-E based systems. As a result there was some interest in whether PCIe 3 would improve performance at all compared to PCIe 2, due to the high amount of PCIe bus traffic generated by three GTX Titan cards working together. IVB/Haswell is of course limited to 16 PCIe 3 lanes, whereas if PCIe 3 is enabled SNB-E systems have more than twice that with a combined total of 40 lanes, giving SNB-E a large bandwidth advantage.

As it turned out, the Intel DX79SR used in the Genesis supported PCIe 3, but only on the 2 full-fledged x16 slots. The third x16 slot (electrically x8) won’t operate beyond PCIe 2 speeds even after forcing it in NVIDIA’s drivers, which is unfortunately a bit of a double whammy since it’s the slot that’s already lacking in bandwidth. That dashed our hopes of a PCIe 3 vs. PCIe 2 comparison for tri-SLI Titans, and as a result the subject never reached print.

However in the last couple of weeks I’ve received several requests for two-way SLI Titan/780 PCIe performance benchmarks, which we did happen to collect while looking into tri-SLI and merely never published. So with that in mind we’re going to finally publish that data, since there’s clearly more interest in the matter than I initially expected.

As a heads up this data is a bit stale; it was taken back in April with NVIDIA’s 314.22 drivers. So the primary goal here is to compare two-way SLI Titan performance on PCIe 2 versus PCIe 3.


At 2560x1440 there’s very little change. The only game to see any kind of notable improvement is Total War: Shogun 2, which picks up 5%, though this is going from 115fps to 120fps. Otherwise PCIe 3 does not confer a distinct performance advantage here.


At 5760 things become more interesting, although again the performance gains aren’t particularly huge. Every game benefits at least marginally from PCIe 3 being enabled; Total War: Shogun 2 once again shows the greatest benefit at 7%, while Battlefield 3 picks up 5%, and Crysis 3 a hair over 2%.

Admittedly this is a small sample set, but it does paint a distinct picture of the PCIe bus being a bottleneck when using surround modes. NVIDIA has never gone into great detail on how their surround mode works, but based on this and previous data we’ve long assumed that they’re shuffling a significant amount of data around via the PCIe bus in order to keep the cards in sync and to give each card the portion of the frame buffer it will be responsible for sending to its attached display(s). This is as opposed to 2560x1440 and other single monitor modes, where the master card merely needs to collect completed frames and there’s no further redistribution involved.

In any case, while NVIDIA does not officially support PCIe 3 on SNB-E systems, between the Genesis and our own testbed we’ve yet to run into an issue in using it. Consequently we can’t see any good reason not to enable it, especially in surround mode setups. Based on our data the performance gains aren’t going to be huge (at least not in two-way SLI), but it’s free performance being left on the table. At the very least it’s worth a shot, since NVIDIA makes it easy to turn PCIe 3 support on and off.

Comments Locked


View All Comments

  • MartinT - Saturday, June 22, 2013 - link

    I call BS. I fully expect frame times to make it into Anandtech reviews by Aug 1st.
  • Ryan Smith - Saturday, June 22, 2013 - link

    They're already in our reviews, starting with GTX 780:
  • MartinT - Saturday, June 22, 2013 - link

    Ah, thanks. Did you ever go back and update the 7990 review?
  • Ryan Smith - Friday, June 21, 2013 - link

    This is one of those cases where I'm just throwing what data I have on the wall. I didn't put much time into the subject since it wasn't possible to get PCIe 3 working on the third slot, so this was all that was collected. It wasn't originally intended for publication.
  • ZeDestructor - Friday, June 21, 2013 - link

    "It wasn't originally intended for publication." We appreciate it though. The trend is obvious here.
  • Remarius - Saturday, June 22, 2013 - link

    I assume a motherboard with a PLX PEX8747 PCIe 3.0 like the MSI Z87 XPOWER will bypass the Haswell lane limitations?
  • sna1970 - Saturday, June 22, 2013 - link

    dont bother with Haswell at all ..

    soon in sept. we will have Ivy-Bridge-E with 40 PCIe3.0 lanes , 4,6,8,10,12 cores options , quad channel memory at 1866 DDR3

    who cares about Haswell ? it is only 3 months to wait.
  • Remarius - Saturday, June 22, 2013 - link

    Not necessarily disagreeing with waiting for Ivy Bridge-E but last I checked the i7-4960X will be six cores..... best not to include them with ultra high spec 12 core xeon's that may or may not be unlockable and even if so will cost an obscene amount. ;)
  • R3MF - Tuesday, July 2, 2013 - link

    won't we still have the same X79 chipset?

    and don't the socket 2011 CPU's run the PCIe from the chipset, in which case we'll have the same slightly flakey v3.0 support that we have today?
  • sna1970 - Saturday, June 22, 2013 - link

    @ Ryan Smith

    you should try Xeons on a 2011 socket , they support 40 lanes PCIe 3.0 officially ...

    to compare , just use a Xeon 4 cores at stock speed of the same Haswel/Ivy i7

Log in

Don't have an account? Sign up now