The Exterior of the Streacom F12C Desktop Aluminum Case

The Streacom F12C is clearly a minimalistic design. It highlights the simplicity of plain sandblasted aluminum, with the only aesthetic touches being the rounded corners and bottom edge of the faceplate. The F12C features a simple yet elegant appearance. Measuring 184 × 440 × 320 mm (7.25 × 17.35 × 12.6 in) and with a volume of 0.0259 m3 (25.9 liters), the F12C is one of the largest desktop cases that we have ever seen, yet it still requires about 50% less space than an average tower case. As the case is almost entirely made from aluminum, it is particularly lightweight, tipping our scale at just 4.35kg.

Only a rounded power on button can be seen to the left of the faceplate, with a pinhead LED light right above it. The black spot to the right of the faceplate is an opening for an infrared remote control device, which is optional. There is no opening for an optical media drive, slim or otherwise, which can be an issue for a case intended to hold HTPC systems. This issue aside, there is another series of omissions: there are no front USB or audio jacks, and not even a reset button. To clarify, there are no USB ports on the sides or top of the case either. For an HTPC case, the omission of front USB ports is a critical issue.

There are three rectangular openings at the top and two square openings at either side of the F12C chassis. All of these openings are air vents. The satin black frame surrounding them is a magnet that attaches on metal studs bolted onto the aluminum frame, locking the mesh filter into the cutout. 


The mesh filters are very thin and soft, with a high aperture. It unlikely that they are capable of blocking much of the dust from entering the case, as some of the very small dust particles will easily go through the holes. On the other hand, they are very easily removable and washable, making them very practical.

The bottom of the case is simple, with some openings punched to serve as air vents. There are four aluminum circular feet with soft rubber pads attached. The chassis model is etched onto the chassis and there is a small sticker with the serial of the product as well.

The rear of the F12C chassis is very simple and plain design. It essentially looks like a typical tower case that has fallen on its side. An aluminum cover shields the expansion card slot screws. Strangely, there are no ventilation or fan openings, even though there is more than enough space of a small exhaust fan.

Introduction, Packaging & Bundle The Interior of the Streacom F12C Desktop Aluminum Case
Comments Locked


View All Comments

  • Daniel Egger - Monday, September 14, 2015 - link

    I fully agree. I also looked specifically for a case with a 5 1/4" bay and front ports. Found the lovely Lian Li PC-C50B which is not only cheaper and offers the mentioned features but also comes with two fans installed, has plenty of space for drives and is available in black which is kind of important since my receiver and other equipment is also black and a silver case would really look like an alien in my living room... One big drawback of the Lian Li case: You *really* have to love screwing because that's what you'll be doing a lot for any tiny hardware change...
  • Bobs_Your_Uncle - Monday, September 14, 2015 - link

    This case isn't for me (at least at the current MSRP) but I really, REALLY like quite a LOT of what I see on display in this case:
    - tolerances on joints, & especially the external panel seams, etc;
    - meticulously precise conical chamfering on external AND internal screw inlets, external AND internal;
    - the exceptional proportionate balance of radials (fore & aft) expressed in the 1/2 bullnose treatment that weds to the top panel;
    - similar radial expression on right & left side panels flowing into the base.

    Extensive photos & well angled views reveal that every element of this case is EXACTLY where they intended & every aspect flows into the next PRECISELY as envisioned. Streacom demonstrates a masterful blending of excellent engineering to gifted design.

    I seriously like where they're going in this case. Design choices & asthetics can (& should) be questioned & debated. But like them or not, their execution appears beyond reproach. The disclaimer of course is: photographs. But these photos give rise to the craving for an up close & personal stroll around the block.

    As it stands, I'll look into the Lian Li PC-C50B. Cuz I do *REALLY* love screwing but so rarely get the pleasure!
  • angrypatm - Monday, September 14, 2015 - link

    It looks as though it's targeted at Apple people, plain, no ports (no versatility). Its pretty, but not friendly.
  • dwatterworth - Monday, September 14, 2015 - link

    Fractal Node 605 makes this thing look just plain silly and overpriced.
    The major problem with attempting to put any GPU's in these horizontal cases, other than blower-style cooler equipped cards, is the airflow. You can either exhaust or supply, a longer GPU blocks nearly the entire airflow path.
    The size I think was more to match existing theater components rather than to provide functionality for this case. It's like they had 2 designers who never talked to each other, one thinking of interior layout and one hacking holes into the exterior. Those top grilles...why not make it more functional and get actual full sized filtered opening with fan mounts? That movable rail system is kind of an afterthought I'd say, little correlation to the case layout or component positioning on the motherboard.

    Like the article says, the exclusion of any front USB ports is such a huge omission, people will just end up having a USB extension coming from the back of the case and mucking up what could be a clean appearance in an theater setup. No sound absorption materials with that high ticket price is crazy too. At least some padding above the main CPU and GPU areas. Then to mount some potential mechanical drives right up against the aluminum with no dampeners or anything? Yes, I'd love to conduct all vibrations through the case please!
  • nightbringer57 - Monday, September 14, 2015 - link

    Well thing thing certainly does not look like a big storage champion, to be honest. I'd view it more like a network bound machine for HTPC purposes. Just drop in a SSD for the system, a bigger ssd if you plan on gaming (or a second cheaper/GB SSD)
  • ImSpartacus - Monday, September 14, 2015 - link

    Yeah, it's hard to understand the use case for this one.
  • DanNeely - Monday, September 14, 2015 - link

    I initially assumed it was a scaled up version of the rest of their cases (presumably checkbox marketing driven design); but while bigger than the remainder of their lineup it has a very different design than the rest.

    Almost of their gallery shots are of black cases; so I'm not sure why they send this model for review. The rest of their cases are a lot more reasonable too; slim mATX/mITX models that either support half height cards or use a riser to mount a full size card or two parallel to the mobo, and with heatsinks that use heat pipes to connect the CPU to the chassis to use as a giant heat sink. I suspect the one case with the PCIe riser is intended for a pair of full height tv capture/etc cards because a GPU would broil in the case. Some of the cases have room for a small fan; but in their intended mode most look like they would probably function just fine passively cooled. Maybe the fan's for if you're using an HDD; I didn't look that closely at layouts.

    The best I can say about this case that it might've been a failed experiment; but the PHBs insisted on production to try and recover some of the r&d costs. It's a pity they decided to send it out for review; almost all of their other cases look like they'd've gotten a better reception.
  • stephenbrooks - Monday, September 14, 2015 - link

    It seems to be a common mistake that "sleek, minimalist design" is assumed to mean "remove all the ports".

    If the company is really phobic about visible ports they could put a flush door in front of them but TBH in my experience doors are more hassle than they're worth. The USB type-C hole is quite elegant, perhaps we could look forward to a future where you just have a regular array of those on the front of the case...
  • Morawka - Monday, September 14, 2015 - link

    wtf is that a GTX 295 Graphics card you installed in that pc? kinda old and outdated ya think
  • BrokenCrayons - Monday, September 14, 2015 - link

    I think the point was to illustrate the case layout, cable management, and what a finished system will look like inside the box. Since consistently repeatable testing of case thermal and noise properties uses a specifically designed set of hardware component simulators rather than actual computer parts, the parts used to show layout in the photo aren't as important. Besides that, the size and general shape of dual slot, blower-equipped GPUs hasn't significantly changed in quite a few years so a GTX 295 is perfectly reasonable.

Log in

Don't have an account? Sign up now